current version of firmware and Sentinel
(1 viewing) (1) Guest
BCD436HP
  • Page:
  • 1

TOPIC: current version of firmware and Sentinel

current version of firmware and Sentinel 27 Nov 2016 17:09 #17065

  • DREHER
  • ( User )
  • OFFLINE
  • Fresh Boarder
  • Posts: 5
  • Karma: 0
What is the current versions for the BCD436HP and Sentinel?

I have 1.07 (revision 5) for Sentinel ( had problems with V2) and version 1.11.20 for the firmware.

Recently upgraded the firmware and now I an having a hard time receiving any broadcast. The radio has been on for 2 hours and I have heard 3 very scratchy VHF broadcast and about 2 seconds of a trunked broadcast. So far my old Radio Shack Pro 96 woks much better.

Trying to listen to departments in the Phoenix, Az area but getting no where so far.


This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Last Edit: 27 Nov 2016 17:11 by DREHER. Reason: added email address

Re: current version of firmware and Sentinel 27 Nov 2016 17:27 #17066

  • vroderick
  • ( User )
  • OFFLINE
  • Platinum Boarder
  • Posts: 703
  • Karma: 32
DREHER wrote:
What is the current versions for the BCD436HP and Sentinel?


1.07.05 is the most current version of Sentinel for the BCD436HP.

1.11.20 is the most current version of firmware for the BCD436HP.


DREHER wrote:
I have 1.07 (revision 5) for Sentinel ( had problems with V2).


Not sure what you are referring to here.... There has never been a version 2.xx.xx of Sentinel for the BCD436HP.

.
  • Page:
  • 1
Time to create page: 0.16 seconds